DFW - Dallas Ft. Worth Insulation is your Preferred Foam Roof and Coatings Contractor

Foam DFW Roof Solutions Are you building a new home and deciding on a foam roof? Do you want a highly insulated and better performing roof? Is your metal roof deteriorating or leaking? Is your current rolled roof leaking? Foam DFW Can Help

The Foam DFW Process Polyurethane foam and our elastomeric coatings will SEAL and totally ENCAPSULATE your flat roof protecting it from the weather. Localized repairs are made if required to the roof. It is swept free of debris and sprayed with a layer of foam. Then our acrylic elastomeric coating is sprayed on top to protect the foam.

The result is a totally encapsulated, weather proofed and seamless roof, protected for years to come. You will of course benefit from exceptional insulation as well.

Protrusions are a prime source of trouble. Spray Foam self flashes to all protrusions (vents, pipes, etc...) There is no flashing tape or adhesive to peel away. The flashing becomes part of a seamless covering.

ELIMINATE SEAMS AND JOINTS

Bayseal's tenacious ability to adhere to most surfaces provides a watertight monolithic seal around penetrations, up parapet walls, and other parts of the structure without the use of mechanical flashings, in most cases.

BUILD POSITIVE DRAINAGE

Foam DFW Polyurethane foam can be sprayed in various thicknesses to create positive drainage and eliminate ponding water. Ponding water is the principal indication of inadequate drainage, a frequent cause of roof leaks. Roof leaks accelerate roof deterioration.

ADD A WEATHER RESISTANT COATING

After the SPF has been applied by Foam DFW to the proper thickness and finish specifications, a protective layer of elastomeric coating is added. This protective layer produces a UV resistant and sustainable surface.

DOE's new range recommendations are based on comparing future energy savings to the current cost of installing insulation. The Department of Energy lists the following reasons for providing a range of recommendations:

Foam DFW Cool Roof Coatings ENERGY STAR (DOE) qualified roof coating products reduce the amount of air conditioning needed in buildings, and can reduce energy bills by up to 50%.

The Cool Roof Program defines certain standards for solar reflectance, 3-year aged maintenance of reflectivity, and emmisivity in roof coating systems.

Reflectivity is the percentage of the sun's heat a roof keeps off a building, and emissivity is the percentage of heat a roof lets out of a building.

Polyurea Coatings for Residential Applications

Foam DFW - Dallas Ft. Worth's Polyurea is spray-on coating with high abrasion resistance, high chemical resistance, excellent durability, and excellent flexibility. Vendors and manufacturers have developed formulations to cover a very wide variety of requirements from extreme surface hardness to extreme elongation. Our job as coating system contractors is to determine all the specifics of your project and select the right polyurea and top coats (if needed).

Main Properties Completely waterproof. Flexible, impervious coating—bridges cracks. Fast cure time. Can support foot traffic in minutes. Very durable and abrasion-resistant. Wears very well. Resistant to many solvents, acids, and corrosive compounds. Many formulations available for virtually any application or need. Very wide range of thicknesses available in a single spraying. No VOC's (volatile organic compounds) released during application. Creates a seamless surface.

Polyurea Coatings for Commercial Applications

Polyurea's Advantages Over Conventional Materials: USDA and Potable Approved Fast Set Nature High Elongation Durability / Abrasion Characteristics Weather Tolerant (cures at -25F to 300F in as little as 3 seconds) Waterproof Seamless Unlimited Mil Thickness in One Application Resistant to Solvents, Caustics and Mild Acids Multiple Color Choices





















Insulation Contractor Listings in the greater Metroplex Area

Find Brite Foam on Facebook
Find Brite Foam on Facebook




















Cities we provide Contracting services























Link to our other Insulation Contractor Websites in the continental United States